Solar Consultation Service

Solar Pre-feasibility Report


A prefeasibility study (of a project) is a preliminary analysis undertaken to determine whether it would be worthwhile to proceed to the feasibility study stage. The Preliminary Feasibility Study will provide [IST] with a high level options appraisal of the various key considerations to address when installing a solar PV array at your project site and whether the proposed array(s) will be building integrated or ground mounted.
br> This desk based study will include advice on the possible array size, electrical performance and financial payback while also identifying barriers to the scheme development. The objectives of the study will be to:

  1. Identify site options for potential array configurations
  2. Undertake a constraints analysis to assess the technical, economic and logistical viability of each potential array configuration
  3. Identify any issues that may compromise the installation of a solar PV array or limit its performance, whether these issues are technical, financial or logistical in nature
  4. Develop a roadmap for [insert name of Group] for the next steps going forward
  5. Screen and prioritise each potential site identified

Scope of the study

The key elements of the Preliminary Feasibility Study are listed below. Any additional requirements the consultant is aware of should be included in your proposal.
  1. Site and resource assessment
    • o High level site solar resource assessment
    • o Location/building suitability assessment
    • o Potential grid connection issues
  2. Array considerations
    • o Options appraisal on different array configurations (e.g. ground mounted, building integrated etc.)
    • o Approximate array sizes
    • o Any shading implications
    • o Array maintenance and cleaning issues
    • o A review of module mounting systems
  3. Performance assessment
    • o Simple financial appraisal and payback calculations
    • o sites potential assessment for development
  4. Practical aspects
    • o An assessment of required planning applications


The deliverable from the Preliminary Feasibility Study will be a single report which addresses each of the points listed within the Scope of the study, and any other relevant information, and includes a concluding section that highlights any issues that may impact on the installation or compromise its performance at the proposed location.

Return to Consultancy Main Page

Consultatcy for

  1. Engineering Consultancy
  2. Solar Power Plant Construction & Management Consultancy
  3. MW PV Module Manufacturing Unit Consultancy
  4. MW Solar Power Plant Consultancy from every states in India.

Submit Your Project Proposal

Engineering Consultancy

  1. Feasibility Studies
    1. Pre-feasibility, Detailed Feasibility Studies
    2. Preliminary Design
    3. Options Analysis
    4. Resource Assessment
  2. Project Proposals
    1. Subcontractor Engagement
    2. Risk Analysis
    3. Detailed Documentation
    4. Budget Estimates
  3. Detailed Design
    1. System Design
    2. Cost/Value Engineering
    3. Grid Connection
  4. Project Management
    1. Project Supervision
    2. Subcontractor Management
    3. Documentation
  5. Expert Software Tools
    1. PVSyst
    2. Solar Pro
    3. Solar Advisor Model
    4. and more ...


Covers the following Aspects

  1. Raw Materials
  2. Environmental Aspect
  3. Manpower Requirement and Training
  4. Project Implementation Schedule
  5. Assessment of Capital Cost
  6. Cost of Production and Profitability
  7. Investment and Financial Analysis


* Construction supervision of plant buildings and structures and Fabrication and Erection supervision of equipment.
* Pre-commissioning and commissioning services.


This will cover all the stages of the project from procurement of the equipment, engineering including civil, mechanical & electrical design, construction, site fabrication, erection & commissioning of the project.

Contact Us